Page 1 of 1
RUNNING BOARD BOLTS FOR SALE
Posted: Tue Nov 15, 2005 2:16 pm
by joel gopan
The SPECIAL 5/16 x 1 1/2" Wide Headed Carriage style bolts for your CCKW/Chev Running Boards. $1.00 Ea. Plus $3.50 to mail up to 10 of them inside the USA.
Note:
The Hardware store variety Carriage Bolt have a head way too small.
May as well do the job right and impress the experts and build a little pride while bonding with your beast.
Posted: Tue Nov 15, 2005 2:35 pm
by Bill_Wolf
Hi Joel,
Are these the same bolts that would be used to hold the Jerry Can bracket on to the running board of a Closed Cab Chevy 1.5 ton.
If so I want some.
Bill
Posted: Tue Nov 15, 2005 6:01 pm
by dr deuce
Don't put the Jerrycan on the CC running board unless you have the extra bracket. ---------You'll be sorry......
With 40# of gasoline hanging out there (sideways) it creates quite a strain on the rear step hanger bracket. That is why they made the reinforcing brackets for the CC trucks
Posted: Tue Nov 15, 2005 7:09 pm
by Bill_Wolf
It is for the Fire Truck and has the reinforcing brackets. They will not be filled...for cosmetic purposes only.
Posted: Wed Nov 16, 2005 12:00 am
by joel gopan
I do not have the Chevrolet Part Numbers for the Gas Can Support Bolts, in my Chev Ord9, but if it has the same head as the other Running Board Bolts, it will be OK, as the Chev and CCKW running Board uses a mix of 3/4" long and 1 1/2" long Bolts of this type, depending if it is for front or rear of the running board. Give me a Chevrolet Number. This Bolt has two numbers, 109014 and 128439,, both are the same dimensions, and interchange thruout the 1941-1945 Manuals.
Re: RUNNING BOARD BOLTS FOR SALE
Posted: Fri Jun 11, 2010 11:50 am
by Warren Duchesne
I need a set of these , Thanks Warren