Page 1 of 1

Reflectors Part 3

Posted: Sat Jan 09, 2010 4:06 pm
by R Cubed
Hi all, having read all about the reflectors, and which ones would be fitted to CCKW's on earlier posts, I thought I would look at the ones on my truck, well it's amazing but there are 2 amber ones on the front corners of the fuel tank ( it's a 352 ) and 1 on each rear side of the bed, all are amber and oval, none on the tail gate, but it does have the holes there.
Once removed and cleaned up a bit they appear to be Guide A-2 made in USA on the frames, the lenses are made by Stimsonite but cant decide which type they are 12 or 12A ?
IMG_3920R.jpg
IMG_3919R.jpg
IMG_3926R.jpg


Also the previous posts refer the the amber lenses but what about the reds which should be on the rear sides and tail gate ? would they be the same style of lens 12 or 12A but just red instead of amber, would they be in the A-2 oval frames as well ?

This picture shows the rear of the reflector and it can be seen that the number is the same as mentioned before but at the end it has a B rather than an A does this mean anything ?
IMG_3929R.jpg
R Cubed

Re: Reflectors Part 3

Posted: Mon Feb 14, 2011 4:47 pm
by R Cubed
Is there anyone out there who has any idea what age these reflectors are and weather they are suitable to be fitted to the front fuel tank frame on a 352 ?

Re: Reflectors Part 3

Posted: Sat Mar 12, 2011 1:06 pm
by R Cubed
All the people out there who know their stuff about reflectors, can any of you tell me what type of lenses these are ?

Re: Reflectors Part 3

Posted: Wed Mar 16, 2011 6:06 am
by G506
http://www.g503.com/forums/viewforum.php?f=25

RC,
try this thread on the G503 forum (hope the link works ok!)
G506