Front wheel drive assembly

[12chip]

I am looking for the internal front wheel drive assembly. I have the axle housing wheels and tires and its all hooked up, I'm missing the internal axles, gears and the differential cover that the drive shaft connects to.
Thank You

[retro-roco]

Are you needing the split axle or banjo axle components, and and where are you located?

[12chip]

I live in Scottsdale Arizona. I'm unclear about the difference between the split vs banjo. The front looks like a pumpkin and the rear says Timken or something like that. If this makes sense let me know, in the meantime I will research.
Thanks

[Brad]

front split axle followed by the front banjo axle hope this helps

[12chip]

Thanks for the pics a big help.

[12chip]

Retro-Roco it looks like a banjo.

[John D]

Is a front banjo axle from a g506 the same as one from a g508?

John

[Brad]

i belive they are different, but i am no expert. i think they are diferent gear ratios

[Nick Bombini]

The front banjo axle on a g506 should be exactly the same as a front banjo g508. I'm not sure about the rears due to suspension setup.

--Nick

[vince]

508and506 driveline gears are the same,the 508 transfercase has a lower gear.the rear end in a cckw is a standard traction,the 506 has a high traction diff in rear. all front end diff"s are high traction.This is all banjo type.I hope this helps.We have 2-cckw and a 506-1.5ton with 50inch tractor tires that work every day in the woods.I am always looking for driveline parts.