cylinder head water by-pass tube

Brad · Post by **Brad** » Fri Apr 10, 2009 11:28 pm

would any one have a tube that is in reasonable shape for sale...or is this just a remake your own issue??

dr deuce · Post by **dr deuce** » Sat Apr 11, 2009 7:17 am

The tube is an odd (by today) size. I doubt you will find tuning. On one of mine, I went to 3/8". The original I believe is 7/16" diameter

John V Cliche · Post by **John V Cliche** » Sat Apr 11, 2009 8:40 am

Hi Brad

Give Frank von Rosensteil a try I believe he has them avail NOS

I have made some using 1/2" steel tubing and fittings avail from NAPA but the radius of one of the bends requires a special "jig"

Hope this helps
John

Brad · Post by **Brad** » Sat Apr 11, 2009 11:15 am

thx guys i will give these options a try ... its nice to talk to people who under stand what it is like to work on these trucks

Brad · Post by **Brad** » Thu May 14, 2009 12:23 am

I have sent for one NOS from Austrailia what a break...