The GMC CCKW

I have an XM211 with a CCKW 5speed manual transmission in it. The previous owner took out the
automatic transmission and put this in with a PTO because they put an M108 crane in the bed and needed
something to drive the pump. I know absolutely nothing about this transmission. I don't even know what the shift pattern is or whether it needs to be double shifted or not. Can someone tell me what the TM is for this
transmission and give me some pointers on shift pattern and procedure.
Thank you very much for any help!!!
Bruce

Its a five speed..... HERES A ROUGHT PATTERN, You do need to double clutch no syncro

2--5--R
I--N--I
3--4--1

http://yfrog.com/mmcckwtransmissionprimeirj

http://yfrog.com/mucckwtransmissioninternaj

http://yfrog.com/0dcckwtransmissionsegundaj
Second Shift.

http://yfrog.com/5mcckwtransmissionreversej
Reverse.

Thank you both very much!!!
That helps a whole bunch!
Bruce

I was finally able to get back under the truck and start cleaning stuff up.
I am partially disabled, so things don't go as quickly as I would like.
This is the data off the fwd end of the transmission.


A_ 11-8-44

WARNER GEAR DIV.
MUNCIE, IND.
T93-1

I will try to post pics and also remove more crud so I can get more data.
Thanks for all the support!
Note: info is on far right of pic.
Bruce