M35 wheels fit a 44 CCKW
-
- Corporal
- Posts: 16
- Joined: Mon Nov 06, 2006 11:10 pm
- Location: Darlington, Indiana
M35 wheels fit a 44 CCKW
Hi, just wanting to know if the wheels from the M35 6x6 AM General trucks will bolt up to the WW2 CCKWs? I have not looked at either wheels for awhile so do not know if they even have the same number of mounting lug nut holes. thanks Dan
-
- First Lieutenant
- Posts: 80
- Joined: Sat Jul 13, 2013 5:42 pm
- Location: Woodend. 3442. 75 km outside Melbourne, Australia.
Re: M35 wheels fit a 44 CCKW
Yes, M35 wheels should fit onto a CCKW as they share the same 6 stud pattern although I seem to recall some one reporting a slight problem with interference on the rear.
I have them on my G-506 Chevrolet 1-1/2 ton 4x4. With the steering at full lock there is some contact with the suspension due to the greater offset and/or width but no problem on the rear.
David
I have them on my G-506 Chevrolet 1-1/2 ton 4x4. With the steering at full lock there is some contact with the suspension due to the greater offset and/or width but no problem on the rear.
David