ring mount
-
- Corporal
- Posts: 15
- Joined: Sat Apr 11, 2009 2:58 am
- Location: Sweden
ring mount
Hi
I have bought a M36 ring.
But I dont have the bars to hold it.
I have found a good Internet page, so i know how it should look like. But do someone know the dimensions of the bars? Length, diameter? Looking also after dimensions on the attachment on the topp of the bars.
Internet page:
http://www.cckw.org/m-36_ring_mount.htm
//Micke
I have bought a M36 ring.
But I dont have the bars to hold it.
I have found a good Internet page, so i know how it should look like. But do someone know the dimensions of the bars? Length, diameter? Looking also after dimensions on the attachment on the topp of the bars.
Internet page:
http://www.cckw.org/m-36_ring_mount.htm
//Micke
Wheels:
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
- Cat Man
- Major
- Posts: 420
- Joined: Thu Jul 20, 2006 9:55 pm
- Location: Green Bay WI
Re: ring mount
Hello Micke,
Congratulations on purchasing the gun mount. When you say "bars" do you mean the three legs or pipes that hold the ring up? We should be able to measure those for you.
Just a note, the photo's on the site are my truck and there is a mistake. The gun ring in the photos is on up side down. It can be installed two ways. The gun mount trolly works OK but it is not correct. Don In California sent me a better manual that shows the correct installation. Notice the brackets in the ring are offset from the center. The correct mounting has the brackets on the lower side and the wider side of the ring to the top.
Live and Learn
Cat Man
Congratulations on purchasing the gun mount. When you say "bars" do you mean the three legs or pipes that hold the ring up? We should be able to measure those for you.
Just a note, the photo's on the site are my truck and there is a mistake. The gun ring in the photos is on up side down. It can be installed two ways. The gun mount trolly works OK but it is not correct. Don In California sent me a better manual that shows the correct installation. Notice the brackets in the ring are offset from the center. The correct mounting has the brackets on the lower side and the wider side of the ring to the top.
Live and Learn
Cat Man
40 Years An Engine Guy
30 Years A Caterpillar Guy
Still Learning Every Day
30 Years A Caterpillar Guy
Still Learning Every Day
-
- Corporal
- Posts: 15
- Joined: Sat Apr 11, 2009 2:58 am
- Location: Sweden
Re: ring mount
Japp thats what i mean! Sorry for the bad spelling.Cat Man wrote:Hello Micke,
Congratulations on purchasing the gun mount. When you say "bars" do you mean the three legs or pipes that hold the ring up? We should be able to measure those for you.
Just a note, the photo's on the site are my truck and there is a mistake.
Ok thanks! Going to look at it.
Wheels:
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
- Cat Man
- Major
- Posts: 420
- Joined: Thu Jul 20, 2006 9:55 pm
- Location: Green Bay WI
Re: ring mount
Do you need the measurements for the legs to support the Ring?
Cat Man
Cat Man
40 Years An Engine Guy
30 Years A Caterpillar Guy
Still Learning Every Day
30 Years A Caterpillar Guy
Still Learning Every Day
-
- Corporal
- Posts: 15
- Joined: Sat Apr 11, 2009 2:58 am
- Location: Sweden
Re: ring mount
Hi
Borrows two pictures from you so I can explain better.
Pictures from Cat Man:
Borrows two pictures from you so I can explain better.
Pictures from Cat Man:
Wheels:
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
- Cat Man
- Major
- Posts: 420
- Joined: Thu Jul 20, 2006 9:55 pm
- Location: Green Bay WI
Re: ring mount
Now I understand your requirement. I will get some numbers in a day or two and will post them.
Cat Man
Cat Man
40 Years An Engine Guy
30 Years A Caterpillar Guy
Still Learning Every Day
30 Years A Caterpillar Guy
Still Learning Every Day
-
- Captain
- Posts: 183
- Joined: Thu Jun 08, 2006 1:10 am
- Location: England
- Contact:
Re: ring mount
We have the same problem (bought some rings but no legs), do you have the dimensions of the legs, are all three legs the same?
Mick
Mick
- Cat Man
- Major
- Posts: 420
- Joined: Thu Jul 20, 2006 9:55 pm
- Location: Green Bay WI
Re: ring mount
Good News! The snow has melted enough here that I can get the shed door open to see the CCKW with the ring mount.
I will get some dimensions for the legs in the next day or two. And will post them.
Sorry for the delay.
Cat Man
I will get some dimensions for the legs in the next day or two. And will post them.
Sorry for the delay.
Cat Man
40 Years An Engine Guy
30 Years A Caterpillar Guy
Still Learning Every Day
30 Years A Caterpillar Guy
Still Learning Every Day
- Cat Man
- Major
- Posts: 420
- Joined: Thu Jul 20, 2006 9:55 pm
- Location: Green Bay WI
Re: ring mount
Here are the dimensions from the mount I have. Mine is an original WWII unit that came as a set many years ago. Note that all three legs are unique. Each is a different shape. The front leg also has a pronounced radius.
I have a template for the adapter plate but it is too big to scan and print. I can copy and surface mail if you like.
Good Luck
Cat Man
I have a template for the adapter plate but it is too big to scan and print. I can copy and surface mail if you like.
Good Luck
Cat Man
40 Years An Engine Guy
30 Years A Caterpillar Guy
Still Learning Every Day
30 Years A Caterpillar Guy
Still Learning Every Day
-
- Corporal
- Posts: 15
- Joined: Sat Apr 11, 2009 2:58 am
- Location: Sweden
Re: ring mount
Perfect! thank you very much.
Im sending you a PM with my email.
Thanks again!
Im sending you a PM with my email.
Thanks again!
Wheels:
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
GMC 353 Open cab, -44
GMC 353 Closed Cab -45 Tipper
GMC 352 Closed cab, -43
Dodge WC52, -44
Dodge WC56 -43
Dodge WC56 -43
Dodge WC63 -43
Dodge WC63 -44
Willys MB, -43
Willys MB, -44
Ford GPW -44
(2) Volvo 9031, -63
Volvo Valp , -64
Scania TGB40 -75
BMW R12 -39
Tracked:
Studebaker Weasel, -43
OT-810 -46 (replica sdkfz 250)
Trailers:
8T Low bed -43
8T Low bed -41
Ben Hur, -44
-
- Draftee
- Posts: 1
- Joined: Mon Jul 26, 2010 10:04 am
Re: ring mount
HI
Please can members confirm the part numbers for the three poles for the gun ring D709 etc.
Regards
6x6
Please can members confirm the part numbers for the three poles for the gun ring D709 etc.
Regards
6x6