Composite bed owners

[DDoyle]

If any of you fellows have a restored composite bed and a digital camera capable of rendering an image 1600 pixels across (or ideally more), please let me know (or email me at ddoyle9570@aol.com).

I have a request - and a proposition - for you.

Thanks,
David Doyle

[John V Cliche]

David,
Welcome to the forum
I have an original composite bed on an unrestored "Norway return"
if this can be of any help to you let know.
The vehicle is currently in "winter" storage
But I could attempt to provide you with some photos depending on your needs.
Regards
John

[DDoyle]

John,
Thanks for your response. What I definately need is a photo from the rear of the bed looking forward shownig as much of the interior of the bed as possible.

Another shot that would be handy would be of the junction of the sidewall and floor of the bed as viewed from outside of the truck, ideally along the length (that is, stand at the rear and shoot forward along the joint, or from the front toward the rear).

Shots should be as tight as possible (that is showing a minimal amount of the rest of the truck, and particularly not the background).

Shoot for the best quality, largest size photo your camera can generate, and email the photos to me at ddoyle9570@aol.com. Be sure to include your name and mailing address.

Your reward for good useable photos sent in the next few days will be a hearty thanks - and next year a nifty all-new book on the CCKW with your photos in it!

Thanks for responding, and I hope to hear from you soon.

Sincerely,
David

[John V Cliche]

OK Dave,
I'll see what I can do
But first I will need to move a couple of things to hopefully get the needed shots

John

PS Bill aka Weasel Nut is restoring a composite bed CCKW He should also be able to provide you with additional info as well.

[Hammerhead]

Hi Dave,
Welcome to the website!! A member of this forum (Brian) has a webpage of detailed pictures of his CCKW 353 that has a composite bed. The web address is;
www.northwestmilitaryvehicles.com/cckw.html

Brian found a very nice CCKW that he's restoring. His nickname is "nwmv".

Good luck with your project.
Hammerhead

[Cat Man]

David,

Go back and check the thread under Technical Repairs dated Sept 13th.

Weasel Nut was restoring his composite bed last fall and posted some great photos. I'm sure he has some additional photos.

Cat Man

[nwmv]

Thanks Hammerhead. David if those photos are not what you are looking I can take some more.

[DDoyle]

Thanks guys, but I can't access the site that Hammerhead linked to - what do ya'll think I am doing wrong?

Thanks,
David

[Cat Man]

Hammerhead,

I can't open the site you reference either. Is the site not complete??

Cat Man

[nwmv]

try this
http://www.northwestmilitaryvehicles.com/CCKW.html

[oldreliable9_47]

I have a CCKW with all wood bed..will hunt some pictures up and/or take some more detailed and get in contact with you.

oops misread your post..you seek composies..

well heck i shall post this pic anywhooo

[Gmcpaolo]

Hello,
I am a newcomer to this forum. I need "A very big help" rebuilding the composite body/bed of my closed cab Gmc 353 - 378100 BI (july 1944). I have scroll down all the pictures as possible on internet and on this forum and read all the related topics as well. The point is that my Gmc body has been totally rebuild after wwii and I would like to give him the original aspect.
First questions are:
1) Had closed cab's composit bodys as did open cabs during 1944? I ask it because I havent faund any pictures of a composite body on a closed cab truck!
2) I have read that during 1944 some wood body lots were still mounted on Gmc's... does somebody knows which frame numbers lots did have it?

Thanks a lot,
Paolo

[Fernando Mendes]

http://img87.imageshack.us/i/cckwsuporteestepe.jpg/