junked chevy G506 frame? Need a few brackets
Posted: Sun Feb 07, 2010 2:04 pm
Looking for a junked chevy frame that will never be restored. Need a few brackets off of it. A few of the bed hold down brackets were removed from mine when a previuos owner put on a dump bed. Going back to a stock cargo and now need the brackets that are riveted to the frame, just forward of the bumperetts..I have been making some of the brackets I will need, but thought this might be better finding the real brackets.
see attached pic.. hope it works.
anyone got any of these? also any of the really thick u-bolt brackets that were used mid frame for the same. these brackets are like 1/2" thick x 1.25-1.5" wide by about 4-5 inches long, with two holes. again, I could fab, but maybe I can find the real deal.
see attached pic.. hope it works.
anyone got any of these? also any of the really thick u-bolt brackets that were used mid frame for the same. these brackets are like 1/2" thick x 1.25-1.5" wide by about 4-5 inches long, with two holes. again, I could fab, but maybe I can find the real deal.