The GMC CCKW

am after a couple of poppet springs for the shift shafts on my banjo axled gmc transfercase
anyone able to point me in the right direction?

Hi Sixbysix,

Although their website does not list CCKW parts per se, I have had very good luck finding several hard to find parts from these guys. You just need to email them a request. The are located in the Netherlands.

https://www.wildenbergparts.nl/

Also, have had very good luck with Rex Ward in the UK:

http://www.dukw.co.uk/STOCK%20LIST%2015.htm

If you know the dimensions of the springs, you may be able to find a suitable replacement from McMaster Carr:

https://www.mcmaster.com/#springs/=1bkqdrs

I believe the TM gives the overall length and spring rate. Not sure about the diameter, but that should be easy to measure.

Lastly, gun shows are sometimes a good place to find various springs. I once needed the spring for the release handle in the hand brake. I happened to be going to a show that weekend, and poked through a bunch of parts on a table. I found one the exact size. The vendor I bought it from (who thought I must be working on an old rifle) was pretty amused when I told him that it was going into a 2-1/2 ton truck...

Best Regards....

Hi mudflap - sounds good will give them all a try.
meanwhile if anyone else has heard of any ......

Rex Ward had some for banjo axled GMC's - all good thank you very Much REX and Mudflap