Drum to Hub screw

Questions and requests about Technical Repairs of the CCKW
Post Reply
RolandRat
Sergeant
Sergeant
Posts: 22
Joined: Wed Nov 08, 2017 9:04 am

Drum to Hub screw

Post by RolandRat »

Hi, My brake drums are 'fixed' to the hub with 3 c/sk screws. Two of the drums have the screw so corroded in that I'll have to resort to drilling them out. Question is, can anyone tell me what thread they are please?
Many thanks.... and Merry Christmas and a happy New year.
mudflap
First Lieutenant
First Lieutenant
Posts: 138
Joined: Sat Jul 07, 2012 12:45 am
Location: Macomb Twp, MI

Re: Drum to Hub screw

Post by mudflap »

Hi RolandRat,

Not sure which axle style your truck has - Banjo or Split

According to Ord 9, SNL G-508, Banjo axles use 5/16-18 x 3/4".

Split uses 1/2-13 x 7/8" .

I wrote a post awhile back for another site on removing rusty fasteners. This procedure may help you with you stuck brake drum screws.

http://g503.com/forums/viewtopic.php?f=26&t=292328

An impact wrench with a large screwdriver bit is also helpful.


Best Regards.......
RolandRat
Sergeant
Sergeant
Posts: 22
Joined: Wed Nov 08, 2017 9:04 am

Re: Drum to Hub screw

Post by RolandRat »

Thank you for the info. Its a banjo axle.
Tried everything, heat, heat/cooling. impact screwdriver. Trouble is the screws are small. Ended up drilling them out.
Post Reply