Does anyone have the part number for the rear brake hoses on a banjo axle CCKW?
Thanks,
Nick
Banjo axle rear brake hose
-
- Captain
- Posts: 347
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Madera, CA
Banjo axle rear brake hose
Nick Bombini
---
'42 M7A1 Generator
'42 M7 Generator trailer
'43 CCKW 352 A2
'45 USMC mobile repair shop trailer
'45 GPW
---
'42 M7A1 Generator
'42 M7 Generator trailer
'43 CCKW 352 A2
'45 USMC mobile repair shop trailer
'45 GPW
-
- First Lieutenant
- Posts: 138
- Joined: Sat Jul 07, 2012 12:45 am
- Location: Macomb Twp, MI
Re: Banjo axle rear brake hose
If its the type of installation where there is one hose for each wheel cylinder, the GM PN is: 2076248
This PN crosses over to a number of aftermarket hoses, such as Dorman H4000 and NAPA 4000.
I recently purchased the NAPA hoses for my truck. They are made in China, but appear to be well made.
Best Regards...
This PN crosses over to a number of aftermarket hoses, such as Dorman H4000 and NAPA 4000.
I recently purchased the NAPA hoses for my truck. They are made in China, but appear to be well made.
Best Regards...
Last edited by mudflap on Tue Jan 28, 2014 12:56 am, edited 1 time in total.
-
- Captain
- Posts: 347
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Madera, CA
Re: Banjo axle rear brake hose
Excellent! I've searched for quite awhile on the net and couldn't find any numbers. I just pulled one off the truck so I'll compare it just to make sure it's the same.
Thanks for the help!
--Nick
Thanks for the help!
--Nick
Nick Bombini
---
'42 M7A1 Generator
'42 M7 Generator trailer
'43 CCKW 352 A2
'45 USMC mobile repair shop trailer
'45 GPW
---
'42 M7A1 Generator
'42 M7 Generator trailer
'43 CCKW 352 A2
'45 USMC mobile repair shop trailer
'45 GPW
-
- First Lieutenant
- Posts: 138
- Joined: Sat Jul 07, 2012 12:45 am
- Location: Macomb Twp, MI
Re: Banjo axle rear brake hose
No problemo.. I would be curious to know what you measure for the length of your current hoses.
My original ones were about 1.5" longer than the replacements. However, everything I found suggested that the replacements were the correct length.
So, I can't help but think that maybe the originals (which had a DOT date from like the early '80s) were perhaps not the correct PN....
Best Regards...
My original ones were about 1.5" longer than the replacements. However, everything I found suggested that the replacements were the correct length.
So, I can't help but think that maybe the originals (which had a DOT date from like the early '80s) were perhaps not the correct PN....
Best Regards...
-
- Captain
- Posts: 347
- Joined: Thu Jun 08, 2006 1:10 am
- Location: Madera, CA
Re: Banjo axle rear brake hose
I had the local Napa order a brake hose so I can check it out. It was an exact match to the one I took off the truck. I've got more on the way now.
The one I took off was 19 1/2" long. I had to chuckle due to the fact that my WWII American truck that is a Norwegian return has brake hoses that say "Made in Japan".
Once again, I appreciate your help. There was definitely a lack of info regarding the hoses.
--Nick
The one I took off was 19 1/2" long. I had to chuckle due to the fact that my WWII American truck that is a Norwegian return has brake hoses that say "Made in Japan".
Once again, I appreciate your help. There was definitely a lack of info regarding the hoses.
--Nick
Nick Bombini
---
'42 M7A1 Generator
'42 M7 Generator trailer
'43 CCKW 352 A2
'45 USMC mobile repair shop trailer
'45 GPW
---
'42 M7A1 Generator
'42 M7 Generator trailer
'43 CCKW 352 A2
'45 USMC mobile repair shop trailer
'45 GPW