I have stripped the brake master cylinder due to fluid leak . I dont have a drawing showing the internal components , so dont know if there is anything missing or if everthing is where it should be . Any help much apprieciated,
regards frank
Brake master cylinder rebuild 353
-
- Private
- Posts: 7
- Joined: Sat Aug 28, 2010 2:43 pm
- Location: Lincolnshire Wolds ,Bomber County
-
- First Lieutenant
- Posts: 138
- Joined: Sat Jul 07, 2012 12:45 am
- Location: Macomb Twp, MI
Re: Brake master cylinder rebuild 353
From Ord 9 SNL G-508, Apr 1945:
Just out of curiosity, where did you get your rebuild kit from? I'll be tackling the same project on my truck, soon.
Just out of curiosity, where did you get your rebuild kit from? I'll be tackling the same project on my truck, soon.
-
- Private
- Posts: 7
- Joined: Sat Aug 28, 2010 2:43 pm
- Location: Lincolnshire Wolds ,Bomber County
Re: Brake master cylinder rebuild 353
Thanks for the reply. Rex Ward has the seal kit .
When I stripped mine down I found an rubber disc under the valve marked H , it looked like someone had added this for some reason, it did not looked like it belonged there , it did not quite fit the valve dia. or the cylinder bore . This is why I asked if anyone had a diagram of the cylinder . And this drawing does not show this extra washer .
thanks , regards Frank
When I stripped mine down I found an rubber disc under the valve marked H , it looked like someone had added this for some reason, it did not looked like it belonged there , it did not quite fit the valve dia. or the cylinder bore . This is why I asked if anyone had a diagram of the cylinder . And this drawing does not show this extra washer .
thanks , regards Frank
-
- Lieutenant Colonel
- Posts: 762
- Joined: Tue Jan 02, 2007 3:29 pm
- Location: Santiago-RS-Brasil
Re: Brake master cylinder rebuild 353
Figure 12-5-Master cylinder(ORD 9,SNL G-508)page 333
H-Valve assembly ,Mfr.'s number GM-249073,Group 1204.2
On page 345 we can see only(group 1204.2):
kit repair master cylinder...........1
consists of:
1 boot
1 cup
1 gasket
3 gasket
1 piston,assembly
1 plate
1 snap ring
1 strap
1 strap
1 valve,assembly)
H-Valve assembly ,Mfr.'s number GM-249073,Group 1204.2
On page 345 we can see only(group 1204.2):
kit repair master cylinder...........1
consists of:
1 boot
1 cup
1 gasket
3 gasket
1 piston,assembly
1 plate
1 snap ring
1 strap
1 strap
1 valve,assembly)
Jeep Willys MB DoD dec,16 1942 s/n:196275
Dodge B3-B 4x2 1952 s/n:90099559
CCKW 353 Banjo 1944 s/n:309623
Dodge B3-B 4x2 1952 s/n:90099559
CCKW 353 Banjo 1944 s/n:309623
-
- Private
- Posts: 7
- Joined: Sat Aug 28, 2010 2:43 pm
- Location: Lincolnshire Wolds ,Bomber County
Re: Brake master cylinder rebuild 353
Thanks guys for the reply . Seals came today, rebuit and back on , but struggling to get it bled . Will try again tomorrow hopefully . Frank